|
FYI, I downloaded the 2.0.2 map (to reload the default values) and went for a drive. Everything was fine and it responded as it should with a single exception. One time when in 3rd at 3k revs, I floored it and hit 18 PSI and then it quickly dropped to 13 PSI and slowly ramped up from there; as it should.
When I floored it just below 2500 RPM, it went to 13 PSI without a spike.
I floored it at 4000 RPM in 3rd and no spike
I even gave it about 50% throttle at 2500 revs, which brought the boost up to about 10 PSI, and then floored it and it went to about 13 - 14 PSI without a spike.
So, the issue would not be seen in the majority fo the cases. You really have to look for it.
|