Quote:
Originally Posted by ramez75
So I have all the hardware to do the install. I was wondering if anyone have some insight on this. I have front and rear PDC so I have the Modules in the back. Where do I install the control passive go for the comfort access. There is no room to put it in so what do I do. I need to keep the front and rear PDC modules.
I will take a picture tomorrow in the day light to show what I mean
Thanks
RB
|
Hello, BM Coding is actually down, don't know why.
I made a doc with ista D about it on my e92, FULL details (some in French sorry) where you will be able to build all your wires, see there:
https://drive.google.com/file/d/0B8v...ew?usp=sharing
About the pdc and passive go place, they are SBS you will see in the doc, must unmounts the rear right side and pull what is behind to see a white receptacle where the modules are vertically and two empty for trailer modules. I have a pic but about an e93 (same place but module alone).
and my Passive module:
I did all the antennas and wiring with the diversity antenna wire, also using the PDC beside to connect K can High and Low (+ground).
Stay to finish : the wire for the CAS - JBE and the doors connectors for the handles, I have the Key ...
