Example photo of what the UIF module view of INPA software looks like
You can see halfway down there is an "FLA" module.
You should see this in your list when the mirror is wired & connected correctly.
But as I said above, more importantly, you need to count the number at the top "Quantity" and make sure that number does not go less than when you started.
It should increase by 1 when you are done, or more.
Also some guides for general mirror retrofit that helped me are attached
also wires required below
1x BMW Power Steering Reservoir - Genuine BMW 32416767161
4x BMW Bushing Contact - Genuine BMW 61130005197
2x BMW Pin-Contact (02 05mm) - Genuine BMW 61130005198
2x BMW Universal Socket Housing Uncoded (3 Pol) - Genuine BMW 61138377072
1x BMW Universal Pin Terminal Uncoded (3 Pol) - Genuine BMW 61136931929
----
optional & required if you don't have auto dim mirror already
1x BMW Retrofit CableInt.MirrorElectrochromic - Genuine BMW 61120434330
|