Quote:
Originally Posted by 101Duck
Drives fine with the stally. It's not stock like take off at part throttle, but hey, sacrifices have to be made!
So I spent yesterday doing some research and today playing around in NCS expert. Took me a fair while to work out what I was doing and how to go about it, but I've successfully removed both the Transmission Faulty and the Start Assistance faulty codes from the Idrive. In doing so I've somehow removed the Brake pedal depressed to start function which is annoying (now it just starts straight away when the shifter is in park or neutral) I really want the brake pedal safety to work. but for some reason when I was reading the module with that option in it it was just coming up as nicht_acktiv the whole time. no matter if I changed it to acktiv and tried to code it. So I gave up for the day and I'll give it a go again tomorrow.
Still having an issue with the cornering lights, they're faulty so I am trying to remove the coding for them and for the life of me I can't get rid of it. I think I've turned off like 6 or 7 things to do with cornering lights and it still throws the error. Must be more somewhere else I'm missing. The other issue I'm having is getting the reverse lights to engage. I can't work out which option I need to change in which module to make it read the reverse light wiring from the manual harness rather than however it was working with the auto harness. (I also assume once I get the reverse lights to work my PDC will work again too)
Sounds a little strange to want all this little stuff working and all the errors gone off the dash/idrive. but like, it'd be cool to have a fully functioning daily drivable bmw sedan which will run 9's all day long in full street trim.
Also just been getting it ready for the dyno session tomorrow night. Should hopefully go smoothly, bought the cable to setup the PI today and loaded the JB4 integration map into it. Going to be a long night of dynoing I can tell lol.
|
Glad ya got most sorted mate, if ya still have trouble over the weekend come see me and ill give you a working cable to use
