Quote:
Originally Posted by Gaffa22
Any chance you could screen shot what it looks like on the USB stick when done
Just afraid of making a mistake and mucking it up
|
really no need for a screenshot, you can't mess this up and even if you did worst thing that would happen is car not see maps and therefore not start update procedure :)
basically copy all files exactly as is on to the usb stick (eg F drive, your usb stick drive letter may vary), eg:
F:\USB1
F:\USB2
F:\USB3
now right click and cut (not copy! or will take ages duplicating the files) the pkgdb folder and config.nfm file from F:\USB1 and paste to root (top level) of stick, you now have F:\pkgdb and F:\config.nfm
insert stick in car and within 30secs will ask for code then start map update
when it asks for disk 2 unplug stick and attach to PC, delete the pkgdb folder and config.nfm you just used. now cut and paste the pkgdb folder and config.nfm file from F:\USB2 to root of stick, you now have F:\pkgdb and F:\config.nfm again, reattach to car and it will continue the copy, when it asks for disk 3 unplug stick and redo same steps for USB3 until complete...