Quote:
Originally Posted by bimmerfan1972
Quote:
Originally Posted by 6ixSpd
This doesn't seem to work in my case. It keeps saying ECU BUSY REPEAT RESULTS.
I cannot do a codierdaten_lessen or SG_codiern to either LSMC or RSMC.
I am trying to code in a used right side AHL headlight. My driver's side one works just fine but I can't read or write to LSMC too. All other ECU s can be read/written without problems.
Any thoughts guys?
|
I am having the same problem after replacing my LSMC. Also had to replace FRM3 since I accidentally bricked it. I am pretty sure both SMC modules work, because when I start the car, the LSMC moves. I can force the right side to move using active tesc (ISTA-D), but not the left.
When I try to follow steps to sg_codiern the LSMC and RSMC I get this same error message. I believe I just need to modify the VO since I swapped out the FRM3. I think right now I have this as $0910, does anyone know what it is supposed to be? |
Ok. What is the original month and year of your car? I don't know what year frm3 is from but let's say you have a original build of 07/07, and it originally had a frm2, when you go to code the new frm3 it will put frm2 files on a frm3 or it won't and you'll get an error. The same goes for the smc modules. If you have your vo set to a different year then what your car is it could be writing the wrong files to your module. I had this issue becuase I left my build date to lci during my cic retrofit. I hope this makes sence