12-08-2020, 11:05 PM
|
#4733
|
Drives: 335i
Join Date: Nov 2014
Location: Australia
|
Quote:
Originally Posted by 135
Here's Odyssey's post where he mentioned the F8X brake master cylinder:
https://www.1addicts.com/forums/show...4#post26600374
To code for HP brakes, add +SPBR to your VO in both FRM and CAS and default code the affected modules (FRM and DSC?) - vtl knows more about coding than me so maybe he could confirm.
I also read that when the DSC is reprogrammed or changed (in this case the former), the steering angle sensor (and seemingly also the yaw sensor, acceleration sensor and input & output valve characteristics) must be reset and recalibrated. Strangely, another thread that said all modules need to be default coded when the DSC is modified.
Also, park your car on a flat level surface when doing this calibration, otherwise, the yaw and acceleration sensors will be incorrectly calibrated.
There are quite a few threads regarding HP brakes on 1addicts and e90post - just search for SPBR.
|
Wow thanks
This is great info
|
|
|