[Biggsie]

Originally Posted by cjalaff

At first I got mixture control for bank 1. I swapped injectors 123 with 456 and then I got mixture control bank 2. I did a resistance test on the injectors and noticed injector #6 changes resistance when hot. When cool all injectors measure around 200k ohms. When hot, #6 will measure very high (500 M +) then goes out of range. As soon as it cools the resistance goes back to 200k. I swapped injectors #5 and #6 and the problem followed as expected. I am ordering a new injector and hopefully this will solve the mixture control error. + Orings and decouplers to be replaced.

update?