OK guys,
I've added another variable into the mix.
I ordered the front Hotchkis bar to go along with my 14mm rear M sport bar.
Since Orb was kind enough to post about the different percentages, I'd like to add my setup to the mix.
I'm going to have the following:
Front
Hotchkis-31.75 mm: 75961 mm^4
Rear
M-sport-14.0 mm: 3771 mm^4
Front/Rear Biasing
Hotchkis front + M sport rear: 95% / 5%
I'll let you guys know about how this setup feels.
Quote:
Originally Posted by Orb
...
Here is the polar moment of inertia calculation for all other bars:
Front:
Hotchkis-31.75 mm: 75961 mm^4
Dinan-28.0 mm: 60343 mm^4
H&R-27.0 mm: 52174 mm^4
UUC-27.0 mm: 52174 mm^4
Stock-26.7 mm: 39310 mm^4
Rear:
H&R-20.0 mm: 15707 mm^4
UUC-19.0 mm: 12794 mm^4
Hotchkis-16.0 mm: 6433 mm^4
Dinan-15.0 mm: 4970 mm^4
M-sport-14.0 mm: 3771 mm^4
Stock-13.0 mm: 2803 mm^4
Front/Rear biasing:
Stock: 93% / 7%
H&R: 70% / 30%
UUC: 75% / 25%
Hotchkis: 92% / 8%
Dinan: 92% / 8%
Stock front + H&R rear: 60% / 40% (Leftcostman
.yikes!!!)
Stock front + Hotchkis rear: 83% / 17%
Stock front + M-sport rear: 90.5% / 9.5%
Stock front + Dinan rear: 87.5% / 12.5%
Orb
|