|
I just got done with hardwiring the V1 by fusetap. I got the fusetap (mini) at Autozone for about 7 dollars.
As for the installation, it is very simple until you get to the ground wire hookup. I had to drill a hole through that metal thing shown in the previous post, but it was very hard to reach that area with my electric drill. The first hole I made was a little to big, so I had to drill a second hole. Also, the V1 ground connector is made of very soft metal and it gets bent out of shape very easily.
Anway, once everything is hooked up, it is very clean and is completely reversible. Good luck people!!!
|