[Flee67]

Okay...finally got the fixture down and it's hardwired now. Thanks. To clarify, the clips are very easy to miss and are very tight and snug against the metal plate which is the edge of the fixture. You'll need a very thin screwdriver (the one in the tool kit works well) to slide in between the edge of the fixture and the clip (about 6 mm in width) and then separate the clip from the metal edge of the fixture. They're centered directly behind the two round lamps. Once you separate the clip, then it's just a matter of pulling down the fixture (it should not take very much force at all once it's released). The best way to see everything is to gently pry away the headliner from the edge of the fixture and then use a very bright flashlight.