Quote:
Originally Posted by TriumphTim
This problem started after removing the head?
I would check the wiring to the temp sensors. I would make sure all sensors are reading at hot temps correctly.
|
Yes, that's right.
As far as I'm aware, there are 3 temperature sensors in this engine in the following locations: thermostat, engine block and at the radiator outlet. In INPA I can see the readings for the thermostat and radiator and it seems they're fine. Regarding the engine block temperature sensor, I cannot be sure it's working as I cannot read it's value anywhere, so I replaced the sensor. In any case, I will again recheck the wiring for all of them.