Quote:
Originally Posted by e91Owner
Quote:
Originally Posted by Moshbmw
Hello all. Am new here and need some help.
Got a bmw e90 318i 2007. Petrol Automatic.
When i start the car in the morning, it starts, idles rough then cuts out. After maybe 2-3 goes it runs.
I ran obd tool. It said cam sensor on exhaust. So i changed it.
Same issue remains.
Ran inpa, this says 2b63, same fault. But i have changed the part.
So i ran ista, this shows 2b62, cam sensor on intake.
Spoke to a friend who believes the timing chain may have jumped a notch and the timing in off, but inpa/ista says nothing to that effect?
Someone else is saying change the vanos non return valves( not the vanos solenoids) but i cannot find this part on bmw oem as a part.
Can is still running rough on start up, not always starting on first go. And sometimes needle is bouncing up and down on idle.
I would really appreciate any advice insight.
i have ordered another cam sensor to replace on the intake just to eliminate.
Thoughts please?
|
I believe the part number you are looking for is:
11111734667.
However, most people on will be less familiar with 318's so take the recommended fixes with a grain of salt. They are looking at your problem through the lens of an N52 engine.
|
Hello, thanks for the reply.
Is this a check valve or a non return valve filter?
Does head need to be removed to change this?
I have the second cam sensor for the intake coming on tue, after i replace this, you are saying I need to get this part that you have shown and replace that also? How many pieces do i need?
Is that what is causing the fault moving from exhaust to intake cam sensor and causing the rough starts and rough idle?