View Single Post
      02-14-2014, 09:37 PM   #5
BMWE934me
Major
BMWE934me's Avatar
United_States
52
Rep
1,098
Posts

Drives: '11 335i E93 Alpine White
Join Date: Sep 2012
Location: New Braunfels, TX

iTrader: (35)

Garage List
2011 BMW 335i  [5.00]
Part 5: Adding Resistors & Bench Testing the Paddles

Part 5: Installing Resistors and Bench Testing.

SEE POST #23 TO BUY A PnP HARNESS or build one yourself with the following instructions.

You will need the following items:
Resistors: 1 each 1.18k, 4.99k, 0.30k and 6.20k (I bought all of mine from Amazon)
Electrical tape or heat shrink
Posi-Locks & Posi-Taps (I used mini 20-22 ga) or Soldering equipment.
Ohmmeter

If you have any questions, please post them and PM me so the I can reply promptly.

Attachment 978453

Attachment 978454

Attachment 978455

Attachment 978456

Attachment 978457

Attachment 978458

Attachment 978459

I hope this helps more of you gain confidence in doing this mod yourselves.

Please post a question if you have them and follow up with a PM so I am reminded to answer you questions as quickly as possible.

Thank you for reading my thread and good luck.

Last edited by BMWE934me; 03-15-2015 at 12:08 PM.