|
Hey guys I know this thread is a few years old but I have to share my experience. I did all the trouble shooting everyone else did. Found no solution until the guy who sold me the 2-3 ballast I tried gave me a tip. He told me to inspect the ballast power plug for damage. Upon inspecting it I found it was melting on the inside and the metal prongs were not making contact. I used a small flat head screw driver to adjust the prongs inside the plug. Plugged it in and I had light for a year with just a little flickering. I've now lost light again and suspect the plug to be the problem again as it's the same light out again. Factoryxenon.com at some point sold the pigtail to replace the plug but had been out of stock for it seems like forever. At this point I have no other solution. Hope this info helps someone.
|