[KevinJ]

When attempting coding CIC. The VO writes were successful however:

ERROR! Modul: CDHINT.CPP, Proc: CDHIntSetScriptFile, LineNr: 02, ErrorNr: 1060
COAPI-1060: error in coding discription file
A_CIC

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 02, ErrorNr: 1000
A_CIC

>> ERROR! Modul: COAPI.CPP, Proc: coapiReadCodierIndexFromSg, LineNr: 05, ErrorNr: 1000
CODIERINDEX_LESEN: A_CIC

>> ERROR! Modul: CDHINT.CPP, Proc: CDHIntSetScriptFile, LineNr: 02, ErrorNr: 1060
A_CIC

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 02, ErrorNr: 1000
A_CIC

ERROR! Modul: CDHINT.CPP, Proc: CDHIntSetScriptFile, LineNr: 02, ErrorNr: 1060
COAPI-1060: error in coding discription file
A_CIC

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 02, ErrorNr: 1000
A_CIC

>> ERROR! Modul: COAPI.CPP, Proc: coapiReadCodierIndexFromSg, LineNr: 05, ErrorNr: 1000
CODIERINDEX_LESEN: A_CIC

>> ERROR! Modul: CDHINT.CPP, Proc: CDHIntSetScriptFile, LineNr: 02, ErrorNr: 1060
A_CIC

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 02, ErrorNr: 1000
A_CIC

Thanks!


Just noticed a cabi.err file which has this in it:

C:\NCSEXPER\sgdat\a_cic.ipo(1) : error I300: Error opening object file

I do not find a_cic.ipo in that location. If I go to the V42 daten source sgdata directory, I do see a_cic.ipo. However running the daten batch file does not add this file. Don't want to just assume I should take everything from sgdata and dump it into the NCSEXPERT sgdata directory but that seems like the likely solution I think.