Fried fsu and connector
Thanks for the excellent write up...I was able to pull out the blower in ten minutes. I would'nt of been able to do it without it.
However when I pulled it out I noticed the wires going into the FSU were corroded and bare because the wire sheild was brittle and fell apart.
I was wondering if I need to replace the black clip that plugs into the FSU or if I could just cut the wires strip and place back into the clip/housing .
Also if I have to replace the clip whats the part number. I checked realoem and couldnt find it.
Thanks
The FSU socket was black so I'massuming I have to change it.
Last edited by Dannyboy; 01-08-2013 at 05:53 PM..
Reason: adding line
|