Quote:
Originally Posted by kens
I bought some wire and a cheap on-off latching anti vandal switch, if you unplug the connector in the back you can wire in positive to the switch and run the wires up through the backseat and center console. on is OE behavior, off is just like the golf tee mod, it turns off the valve and leaves it open.
Cost less than $20
If you wan't to make it permanent, just snip the positive wire (leaving the plug connected) and use these
|
Hey I'm a bit dense but once I understand I become pretty good. So right now I'm still in the "don't understand part" so if you don't mind can I just ask a few questions since I'm really interested in this.
The image you posted shows the switch with a red and black wire but just to confirm the black isn't ground right? Because a positive wire has to come from connector (coming out of DME) into the switch, then a positive wire has to come out the switch into the valve? So does that means I have to wire a ground in between both connectors without going through the switch. Am I understanding this correctly?
Also to leech off the stock connectors, I guess I use like a spade connector on some wire or another way?