Quote:
Originally Posted by magic77
Its just case of unbolting the old exhaust at the join to the cat at the front and unclipping the rubber hangers. You will also need to unscrew the bracing plate on the tunnel.
IF you have a good jack not a problem to do it yourself. Exhaust is in two pieces to make it easier to fit. Do the mid section and then the backbox. Have a look at real oem and compare the part numbers / shape from the 04/2009 build to yours
|
Got access to a two post lift so getting the car in the air is not a problem. What i was getting at was i have no Welding equipment to hand should it not be a straight bolt on replacement.
Ill do some research on Real OEM, good shout