Install
Final step, wiring everything up and fitting it into the dash
It was pretty late in the day, so I did not get lots of pics of this stage
Is basically a reverse of the removal stage and if you following the wiring instructions provided by your supplier, it should be pretty simple
One word of caution, the colour of the the plugs do not always match, so don't be concerned if the plug is green and the socket is blue
Also remember to reconnect and test everything before installing everything in the dash
It is much easier to switch plugs around before you install everything and have to pull it out again
Last edited by Socket; 08-08-2016 at 04:26 AM..
|