|
just in case anyone else is planning on doing this i would HIGHLY suggest NOT using the M3 lower control arms as they DO NOT FIT the e90 335i subframe. the subframe WILL need to be modified in order to accommodate the width of the bushing end of the lower control arms. the m3 tension struts are a DIRECT EXACT FIT which is wonderful. also, be aware that you MAY have to cut off the studs of the lower control arms (as i had to do) in order to get them out.
this job is EASY in concept, but was a NIGHTMARE in reality due to the fact that i had to use a dremel and hack saw to cut off both lower control arm studs and that i had to modify the subframe to get the bushing end in.
if anyone has questions on this just PM me.
|