Quote:
Originally Posted by weehe126
1/4 should be good. I just did it over the weekend with 1/3 left. Just make sure you are prepared for fuel to spray out of the drivers side line when you disconnect it from the top hat. Took me about an hour start to finish.
|
yes be aware of the line spraying, I purged my lines and still had a bit of spray coming towards me. Undo connections at the LPFP first then start on regulator. Be patient with feeding the lines. FCP already has a curve in them for you to help a bit but you will at least have to feel/re-feed one line. Good luck bro