|
So, I sorted this out today. It's not pretty, but it'll work just fine. I tried putting the brackets on the other way around (opposite to how newtis says they should be), but that moved the centre section of the bar too close to the subframe.
At that point I was just a bit fed up, so I grabbed a drill and drilled the bracket holes out to 12mm (bolts are 8mm). That allowed enough slack to move the bar back away from the subframe a bit, and clear the other suspension arms too.
So, a bodge fix, but it'll function 100%. Shorter links may also have done the trick, but £$...
|