|
Pierre26 thanks for your reply. here is a brief of the issue background:
for test reason I tried to program a module with D-KCAN cable and WINKFP. to start I took TEL/ULF module to minimize the risk! as you see it had to fail! later I could have the ISTA/P and tried to fix the issue of TEL/ULF. obviously it had to fail again with K-DCAN cable! this time it destroyed another module too! as I remember, ISTA/P could program the GW (Gateway) but it failed at BO.
now I try to program BO with ICOM B but as you see the modules are grayed out. (if my ICOM B is bad or MOST bus is broken somewhere, I don't know)
as you suggested, I will try to check all MOST connections one by one. please note that I have CCC and not CIC (it's the old X5 E70 2007). my goal is just bringing back the module to life and doesn't want any tweak or customization. actually my CID is in boot mode and I have no sound in the car.
I don't have any possibility to rent a functioning ICOM B and I appreciate if you can share a link.
thanks again for your input.
|