Quote:
Originally Posted by relative4
Where did I say that?
|
Here
Quote:
Originally Posted by relative4
Got it worked out. Part of the radiator mount has to be cut. This isn't mentioned in the documentation, because there is no documentation.
|
This person also says they trimed theirs in their install
Quote:
Originally Posted by Rube
Thanks for the tips everyone, i finally got around to installing the IC today and it went in without issue. I trimmed the piece exactly as the OP showed. I agree that the IC inlet hose is a tad bit short, another 1/2" in length would be perfect.
|
And this person seemed to agree with you it needs to be trimmed.
Quote:
Originally Posted by Jwallace410
For the 5" stepped core, theres only one piece of plastic that needed to be trimmed, same as OP's picture. When you go to do the passenger side and correctly place the IC, the plastic rad mpunt will prevent you from getting the IC flush. Thats the only trimming needed for the 5" core
|