Quote:
Originally Posted by acidbbg
Just wanted to chime in that I fixed everything.
I am now able to close windows/mirrors/top and open windows/mirrors/top.
*Quick Note that my Key Fob battery was dying so this may have contributed to my issues with not being able to drop the top.
*I replaced the battery in my CA Key Fob, codded everything back to stock coding.
Since I already had comfort access, all I needed to do was the following:
NFRM:
SPIEGEL_KOMFORT_EINKLAPP
set to aktiv
CAS:
KMFRT_SCHLIESSEN
00
*Note i was able to accomplish by following by using this information from an earlier post:
1 load expert profile...
2 ... read CAS
3 change the value you said (line 0030020...) in NETTODAT.trc (in WORK folder)
4 save as NETTODAT.MAN
5 in NCSEXPERT, load "revtor's profile" (or "FSW PSW MAN" which should be the same?)
6 click "Basic Functions" and select "coapiCodeSgByNettoData"
7 Nettodatenliste: select my NETTODAT.MAN
8 click OK to code the car.
|
it is possible to change the time to roll up the windows? instead of waiting 5sec with fob? as for the mirror closure
What line in the CAS, nettodat trc