View Single Post
      01-17-2013, 07:04 PM   #3

Drives: 2008 335i
Join Date: Jan 2012
Location: Atlanta, GA

iTrader: (2)

Originally Posted by Modded328FTW
Yea the dealer will most likely not work for you as for them it's press one button and the software does the rest. Unfortunately that software needs everything to be normal and unchanged for it to proceed.

Now if you can find a shop with an "Autologic" unit, that will allow you to update just the dme or another other module seperately.

Now if you are good with coding, you too can update just the DME via winkfp, but I shall warn you that if you are not confident with coding don't try it (can result in a bricked DME).
Is that the update that takes a couple of hours with a 30A charger attached? Wouldn't it be hard to source the DME software?
2008 335I E92, AW, VFF700, 18" Forgestar F14, M3 front/side, M-tech rear, AMS IC, H&R Touring Cup Kit suspension, HID AE, ER Charge Pipe & Synapse BOV, CIC Retrofit, Quafie, DSS, Defiv Lockdown, SPEC 2+/Steel SMFW, Walbro 450