Quote:
Originally Posted by sd*********
You are not following the correct steps. The adaptive modules have their own modules and you aren't even coding or choosing the correct module. What side module did you replace? Go into ncs expert:
F1
F3 e89
Choose CAS
F6 back
F4 process ecu
Choose LSMC if you replaced left side adaptive module or RSMC if you replaced the right side adaptive module
F3 SG Codieren
If the adaptive module you installed is functioning then this will code it to the car. If it fails then the adaptive module you installed is most likely not working.
|
eh well that would make sense. It's the left side.
I will give this a shot and hopefully it'll do it (might not have a chance for a few days though)
Should the ignition be on (with car not running) or off when I do this? I read somewhere that when you do "CAS" the ignition should be off...
Thanks so much, really appreciate it! I thought I had all the steps down from what I found on other forum posts, but clearly not...