Quote:
Originally Posted by vasillalov
The links in the DIY have been updated.
|
Vasil,
I'm having some issues with the install of the software. I'm using Windows 10.
So far I have done the following.
1) Installed the drivers for my INPA compatible D-CAN cable.
2) Determined that it is using COM3 for the port.
3) Changed the port settings to match your screenshots
4) Extracted the zip file to the C:
Setting up INPA
1) I've created the shortcut on my desktop
Here's where I'm running into problems.
In environmental variables I have more than two options but I do have TEMP and TMP as two of them. Looks like this :
https://photos.google.com/search/_tr...XZJx_COhhOqRt5
I highlight TEMP.
Then I highlight Path in the lower window and click Edit.
What I get then is a list of items that look like this :
https://photos.google.com/search/_tr...JR2G-PePVzmxj1
I created the last one that says C:\EDIABAS\BIN
What am I supposed to be appending because when I click edit on the path none of the options look like they are the path itself. I mean, the path says "C:\Windows\system32;C:\windows;C:\windows etc etc but none of the options in the edit window show the same string. They are all either %systemroot or C:\program files
Please can you explain this part a bit better.
Also, when I edit the .INI file I see this :
https://photos.google.com/photo/AF1Q...BakePGQ-JDNQjH
Am I changing the COM5 at the top to read COM3 ? (COM3 is my port as per device manager)
What about where it says COM2 at the bottom of the file ?
I replaced #6 injector last night with a slide hammer made out of a nut screwed onto the injector, a piece of threaded rod screwed into the nut, a large socket to slide up and down the rod and a nut on the end to stop the socket from sliding right off. Hey, it worked eventually. ;-)
Thanks
Will