Thank you so much for this diagram. I put 2009 LCI powered sport seats into my 2007 which formerly had power seats only and no other features.
The driver's side had power but the passenger side had no power. My friend let me borrow his LCI so I took a look at his passenger side harness. Got power to work by copying the harness (moving pin 9 to pin 4 that's it), but I didn't mess with the other wiring since I wasn't sure.
Now I have confidence to attempt to get side bolsters/lumbar/memory working.
Quote:
Originally Posted by dasammy
Really great work so far!
But your pictures can't bee shown!
Of course I like to help you with the DIY!
Currently I'm working on a terminal diagram that shows the connections of the pins from connector X275 / X279.
But there is still a lot missing ...
I will post the unfinished one, so you can have a look at it.
Greets,
Mario
EDIT:
The colors of the cables may be different!
The discriptions of the pins are translated 1:1 from German to English, so it could be that some of them could confuse you . If so, then just give me the correct discription ... thanks
|