Thread: Roll bar help
View Single Post
      10-09-2012, 09:15 AM   #12
cvc 22349a
cvc 22349a's Avatar

Drives: 335i
Join Date: Sep 2007
Location: SF Bay

iTrader: (11)

Originally Posted by NokTurNaL 330i View Post
CVC and CJ are on the $ here.

I installed PS V2 kit and am really impressed compared to ZSP. I think it is a great set-up for dd and tracking. If you notice BMW engineers did not change the rear sway bar with that kit, I am guessing they know "something" about this suspension. I would recommend that you get matched dampers and springs. The height changed only in the rear by about 1/2in, so not much. I had three instructors drive the car and they were also impressed with the V2 kit. I asked them about M3 bits and they said that is the last step after wheels/tires, brakes and lsd. I will not be installing M3 sway.

CJ, CVC - what rear toe arms would you recommend. I read there are some issues with joints with HPA parts. Meyle or other?

OP - hope you don't mind the question in your thread

Hope this helps.
That's OT here. Read my RE toe link thread
2007 E90 335i, TiAg, 6AT, ZPP, ZSP, ZCW, 6FL, HD
Quaife lsd, ETS fmic, GIAC s/w, Dinan intake/exhaust/oc, Koni/M3 susp, Apex Arc 8, Mich PSS