View Single Post
      09-30-2021, 03:52 PM   #6
Prican77
New Member
0
Rep
17
Posts

Drives: 03 350Z MT; 07 E90 335i MT
Join Date: Dec 2019
Location: Cleveland, OH

iTrader: (0)

If anyone is wondering as far as an update I’ve replaced my crankshaft position sensor and also done the FCP Euro OFHG kit this week. Also will have an aftermarket IC/CP/BOV installed by the end of the weekend working out of my driveway. Depending how things go I might attempt the valve cover gasket as well.

Any advice on doing the WP replacement separate of turbo replacement? Is the only hassle just having to fill and bleed to system a second time during the turbo install, or is the actual replacement of the WP impossible unless you do something crazy like drop the subframe? Seems like a pretty straight forward job to remove thermostat and pump from under the front of the engine bay as long as the car is jacked up and you can reach under and up to the 3 E10 bolts holding it in?
Appreciate 0