|
Just removed my headlights and this was the most useful guide I could find. For 335s with the oil cooler, there is a bit more work you have to do. You have to take off the passenger side wheel and wheel liner. You also have to unbolt the three bolts holding the oil cooler in order to remove the clamp holding the headlight. There’s no room to work if you don’t do this. There’s way more room to work on the driver side. All I had to do was jack the car up a little to increase the wheel gap.
My car is also equipped with headlight washers. I couldn’t figure out how to remove the headlight washers from the headlight bracket so I left them on the bracket and disconnected the lines. Unfortunately this was very messy because as soon as I disconnected the lines, washer fluid started pouring out.
|