View Single Post
      01-15-2012, 02:34 PM   #1510
Detailed Image
BimmerPost Supporting Vendor
Detailed Image's Avatar

Drives: Detailed by Detailed Image
Join Date: Apr 2007
Location: Albany, NY

iTrader: (5)

Originally Posted by Aacaron View Post
Hi Greg, I recently purchased some products from you including Menzerna Super Finish Polish SF 4000. I have a 6.5' orange and white pad for my porter cable. I Had my car prepped by the dealer (should have passed on it) and I have noticed some very light hazing on the corner of the rear bumper. Car is space grey.
I plan to use the polish with the orange pad first and then follow up with the white pad. Do you think this process will be abrasive enough to remove the hazing?
Thx in advance
Sorry to hear about the dealer prep, unfortunately there bad work is all too common. As for the solution it's really hard to say without seeing it and ultimately just testing a combo out. You may want to just start off with the white pad and the SF4000 it's a great combo that has a good chance to remove the haze. If it doesn't work step up to the orange pad as you mentioned before. If that doesn't work you can step up to an orange pad and the Menzerna SI 1500 or the Meguiar's M105.

Greg @ DI