Quote:
Originally Posted by TDIwyse
Something seems out of whack with your readings. Are you using the MAF based boost approach? If so it uses the MAF readings and what you enter for the vehicles engine size, volumetric efficiency, etc. for calculating a boost number. Using the correct engine size and VE should help you get the boost numbers to line up fairly well (it's still off some, but it's within a couple psi of the gauge through most of the operating range when I compare things). To do this you need to edit the vehicle profile.
And at least on the version of Torque I'm using "boost pressure" is reporting "gauge pressure", so it's not including the normal ~14.7 psi from atmosphere.
Hope that helps. 50psi would be deeply sub optimum if it's real.
|
That did help. Thanks. Changing to a new phone I forgot to set the vehicle profile. Torque does use the MAF calculation method. In preparation of my next project, I did a few logs (3rd gear pull and 6th gear full fueling) this afternoon with my original vehicle profile set and now the numbers are back where they belong
: