View Single Post
      03-08-2021, 02:28 PM   #1033
Expert@ApexWheels
BimmerPost Supporting Vendor
Expert@ApexWheels's Avatar
3525
Rep
6,752
Posts


Drives: M3
Join Date: Jun 2012
Location: Bay Area

iTrader: (0)

Quote:
Originally Posted by dcorn View Post
It's a great look. How is the 18x9.5 +35, would those fit square? Would 265s on those fit the car or am I pushing it at that point? I don't want any tire stretch or rub.
Hi there,

The 18x9.5" ET35 square setup is typically only something we recommend for track/race-focused vehicles due to the high camber requirement. Here is some additional information regarding that setup:

Front & Rear: 18x9.5" ET35 with 265/35-18 tires
At least 5mm front spacers are required for inner strut clearance. Aftermarket suspensions that are known for reduced inner clearance (see below) can not be used with this fitment.
At least -3 degrees of front negative camber required.
275/35-18 tires can be used with additional negative camber.

If you are looking for a street-focused direct fit setup, I would opt for the 18x9" ET30/31 rather than the 18x9.5" ET35 due to the modifications required.

-Geirsen
__________________
Appreciate 1
Yeahbuddy125.00