Quote:
Originally Posted by Tiago@VRSF
Measure the ID of the OEM outlet adapter which when installed is inserted INTO the OEM interooler's inlet and outlet Rob. That's where the restriction lies. When utilizing OEM connectors, you're limited to the ID of the OEM inlet/outlet adapter which are certainly not 2.4", but less than 2" ID.
|
If one were to try to re-use the accordion style OE coupler with any new high flow outlet, for reasons unknown, then agree it would be less ID at around 2.1". A standard straight 2.5" ID coupler will correct this condition.
The point was that the use of the OE style circlip connections on an IC itself, is of no restriction. Here is an adapter that shows as such.
Rob