Quote:
Originally Posted by langsbr
If you get them and they have the teflon seals either not installed, or installed but not with the metal cap - you MUST use the install tool.
I would not remove your injectors at all unless you have that tool, or buy new injectors. Failure to replace the teflon seal is just playing with fire.
You can look up ABR Houston and he describes the issues that can occur. If that seal is not perfect, it can melt a hole in the cylinder head. Too much risk for a 2.50 part.
I would get the Index 8s over the index 9s, but I just replaced 3 of my index 8s that were bad, so take that for what it's worth.
|
The index 8 remanufactured injectors come with capped tips according to the seller.