Thanks
i actually had to re-compound the entire vehicle with meg 105 on a surbuf pad. some of the sanding marks were bad enough that they required me to do it twice! i followed that up with 203S white pad and finally po85rd black pad.
I haven't completed the vehicle yet. only up to step 2 with 70% of the car.
tough work!
Quote:
Originally Posted by Detailed Image
The Menzerna Micro Polish SF 4500 (PO85RD) with a black pad is a pretty light pad and polish combination. This will really only help remove extremely light surface imperfections. If the shop does a very good job polishing the surface this would be a good follow up. I do think you'll probably need something a bit stronger though so the Menzerna Super Finish Polish SF 4000 (PO106FA Nano Polish) and a white pad may be a better starting point. If this is not enough I would recommend moving up to the Menzerna Super Intensive Polish SI 1500 (PO83) with an orange pad (PO203S has been discontinued because it was so similar to the PO83). Follow up with a lighter pad and polish combo to ensure you don't have any haze left behind. Let me know if you have any other questions and I'll be happy to help.
Greg @ DI |