Quote:
Originally Posted by Volasko
Would you know how much the toe angle changes with respect to change in camber. I had my alignment shop try and get close to 0, actual toe settings are 0.12 left and 0.11 deg right for a total toe of 0.23, this all while my front camber was around 3.8 deg on both sides. Going back to stock settings would have my front camber at the 1.9 deg range. Essentially want to know if I'd be burning up my fronts on my DD after the change and don't feel like going for another alignment just to confirm myself.
|
Why didn't you have them dial back camber on the rack so you could see the change real time?
Regardless; easiest thing to do at this point is to buy/build some toe plates and get a couple of tape measures. That will give you exactly what you are looking for at very low cost.