View Single Post
      09-16-2020, 10:50 PM   #4
dpaul
Major
United_States
348
Rep
1,260
Posts

Drives: 2009 E90 335xi, 2011 E93 M3
Join Date: Dec 2012
Location: Boston

iTrader: (3)

Quote:
Originally Posted by hbdunejhgebn View Post
According to the DME replacement instructions on newtis all that has to be done is to input the injector values using INPA.

https://www.newtis.info/tisv2/a/en/e...-units/HHCUEOE
Only if you buy a brand new DME from a dealer, in which case it will come programmed with the correct SK (secret code) to match that encoded in the CAS.

If you install a used DME without aligning it to the CAS, the car will crank but not start. Unfortunately, BMW standard tools cannot perform the necessary alignment.

But first, what if any error codes are reported? Also, what EXACTLY does INPA report after selecting "N54" then either F1 or F2?