Quote:
Originally Posted by GovernUrMental
No emulator required. provided you can do all coding and nav activation. make sure the CIC head unit that has latest C1A firmware.
Only these https://www.ebay.com.au/itm/264299121978
No
as above
NA
Yes
Car optioned with: S655, S677 (mulf2 hi + TCU), S609, S6FL |
Thank you! super helpful info. Regarding the ebay link you sent, just wanted to confirm, are these used in place of the repin procedure? Or is there still repinning involved
Quote:
Originally Posted by GovernUrMental
CCC/CIC idrive controller is same plug. Thats what the 4pin plug is in the kit linked. but its not needed. Check your ccc controller plug first to confirm.
|
Quote:
Originally Posted by Andystobbs
Just because the plug is the same doesn't mean they're cross compatible. The CIC controller has 7 buttons not 1 as per ccc.
An android h/u designed for one may not work with the other.
|
Damn, I was fairly certain CCC control worked on CIC (fully OEM) going into this thread. But good point about the Android compatibility. Would either of you happen to knowif the controller connects directly to the display? or does it go through the head unit then the display in series?