View Single Post
      02-12-2010, 04:19 PM   #9
jtsherri's Avatar

Drives: TBD
Join Date: Aug 2008
Location: Metro Detroit, MI

iTrader: (14)

Garage List
2008 135i  [5.00]
Send a message via ICQ to jtsherri Send a message via AIM to jtsherri Send a message via MSN to jtsherri Send a message via Yahoo to jtsherri
Originally Posted by ********* View Post

Spacers are needed between the SWS-8s and the factory underseat enclosures in order to provide enough clearance for the slightly taller SWS-8s. < This is a must! Another spacer can be placed between the grill and the carpet. Some leave the grill off and others just use the spacer. Some even put the spacer and the grill under the carpet. In some situations, the spacer and grill need longer screws to secure them to the enclosure. (e.g. The spacer is on top of the carpet and then the grill is placed on top of the spacer.) You can either make your own or buy a set from one of the member on the forums.

"Short review: Custom Earthquake SWS-8 / SWS-8x spacers"
These are the spacers I used.
Thanks for the props!