Quote:
Originally Posted by Ken Oath
Quote:
Originally Posted by Superdaws
You can definitely get the 1b file from CIC to generate FSC with just a standard OBD2 to ENET like you use to flash/code read for F series cars (wont work with the USB version unless you can link the USB port to an IP address).
It is a bit involved with using ftp via the cable on an Ethernet port and logging into the CIC to access the files. Definitely possible. For anyone looking to do it this way google "generalPersistencyData_DiagnosticSWTControlle r" <- this is the file you need to download from the CIC HDD to then convert into a 1b file via hex editor. You can then generate FSC codes with the 1b file.
Ty for the link!
|
Isn't it easier to use the USB CIC extractor?
No need for ENET, ICOM or hex editor. |
Yep newer method which wasn't available when I extracted mine. Probably easier yes, but I don't know about this method. Just posted what I knew, but prob better suggestion yes.
Cars that had CIC from factory should have the OBD Ethernet connection. Good point Vince!
Thank you again though chappy for the link!