Hey folks,
I just coded my CTM module in order to operate my roof while driving (in motion):
The line that needs to be change is GESCHWINDIGKEIT
default should be wert_02 (which is 00 km/h)
After using NCSDummy you can change it to the following values
32 = 50km/h (which i think is way too high, but it's your call)
1eh = 30km/h
14h = 20km/h
Code it via nettodata and you are good to go. Just remember that doing so if you hit a pothole you can damage something. Use with caution only for emergency
.
Enjoy,