Quote:
Originally Posted by Nadir Point
The best way to find a non-obvious boost leak is to pressurize the system. I use an adapter made of a few pieces of brass and fittings connected to a regulated 30psi on one side then plugged to the intake at my W/M switch distribution point. I's pretty easy to find that leak - just listen for the hissing noise.
The Boost Test Adapter has a shutoff valve and a regulator valve of it's own to allow slowly raising the pressure for setting pump and solenoid turn-on pressures. |
any chance u make a video or at least show on pic how and where u pressurize it and where you measure it?
what is intake at my W/M switch distribution point