|
Tried doing this mod and could not cut off completely the 3 or 4 "tabs" that hold the rear fog button (in other words, the 3 or 4 "tabs" that prevent the button from being pushed). On my button I could only see 3 tabs (2 on the bottom, IIRC, which weren't too hard to cut, and 1 tab between the switches near the corner of the switch, as noted in the picture at the front of the DIY). Is there a 4th "tab"? If so, how do you get to it?
1. Do you need to remove the rear fog button to do this mod? If so, do you just release the two "connectors" using small screwdrivers as noted on the interior of the button?
2. Do you cut-off the tabs prior to removing button (I would think you would need to cut the tabs first otherwise the button won't come out)?
I know it seems that these questions may have been addressed, but honestly, I can't for the life of me get the tabs cut-off, particularly the 3rd tab between the buttons (or even get to the 4th tab as I can't see it). Pleae help. Thanks!!
|