View Single Post
      07-20-2010, 06:04 PM   #1
BimmerPost Supporting Vendor

Drives: E30 M3, F10 M5
Join Date: Jun 2009
Location: Bay Area, CA

iTrader: (6)

Arrow APEX ARC-8 Light weight track wheels (18x8.5" 9" 9.5" 10") 1000+ wheels ready to ship

18" APEX ARC-8 Wheels, in stock and ready to ship! - Aftermarket Performance EXpress

E90/E92 Fitment CLICK HERE

Designed for the HPDE and race weekend user, these wheels provide significant weight savings and the proper fitment for extreme summer and r-compound tires
while exceeding the strength and quality requirements for every day street use.
Both staggered and square setups are available, along with 4 finishes to choose from.
The 18" wheels can clear up to a 380mm stoptech kit, and the 17's can clear 355mm kits.
These are the perfect solution for anyone looking to improve performance through a significant reduction in unsprung weight, without breaking the bank.


18x8.5" et38 - 18.45lbs - $289
18x9.0" et42 - 18.65lbs - $299
18x9.5" et35 - 18.85lbs - $314
18x10." et25 - 19.95lbs - $324
17x8.5" et40 - 17.0 lbs - $249
17x9.0" et42 - 17.2 lbs - $259

Wheel Details:

Manufacturing process:
All APEX wheels are flow-formed resulting in a light weight, track and street worthy wheel.
Flow-forming significantly reduces weight in the barrel by rolling the barrel out into it's final shape using large wheels/disks applying high pressure.
This step is the same step that monoblock forged wheels go through to shape their barrels.
By doing this, the flow-formed wheel's barrel has the same density and strength as a traditional forged wheel.
This significantly reduces rotational mass at the furthest point from the center, which is the most important weight savings area on a wheel.

These wheels exceed industry strength requirements for street and track use
They are fully VIA and JWL certified with a load rating of 1550lbs
All wheels have VIA certification numbers

The wheels will be available in 4 finishes
Hyper Silver
Satin Black

Comes with carbon-look APEX center caps
Accept OEM Roundel center caps
Install using your factory lugs or a stud conversion. no special lugs required
accepts wheel spacers including 5mm while remaining hub-centric
TPMS compatible

Last edited by Eddy@ApexRaceParts; 05-23-2011 at 02:25 PM. Reason: updated