|
I’ve got an issue with mine.
When the car turn on the controller doesn’t respond and doesn’t light up. I have to hold a combination of the top three buttons in every so often as this makes the controller light up (but then the light goes out). I have to do this fevers so often and after about 15 minutes it will work as normal. I’ve noticed that the temperature plays a factor in it as over this winter with low temperatures it takes ages to get it to work but so how if it’s warmer than about 9/10 degrees Celsius it starts working after I hold a few buttons in.
Do you think it’s the solder?
It’s a cic idrive controller. I haven’t got anything to test voltage.
|