I got everything setup and communicating with my 2011 328i. After replacing the RDC module trying to reset it. Below is what I am using and what I am getting. Any help or tips is much appreciated.
Using NCS-Expertentool V4.0.1, CoAPI: V3.13.2, KrAPI: 3.0.2, Ediabas: V7.3.0
Cable I got: BMW K+DCAN OBD2 Cable Switch FTDI FT232RL Tools INPA EDIABAS NCS EXPERT ISTA
https://www.ebay.com/itm/BMW-K-DCAN-...72.m2749.l2649
Error:
[13:55:35.717] [2019-02-18] [SERIE] 2020 Error LFCDHDIA.CPP (A_E65R.IPS/IPO) CDHapiResultText 1
[13:55:35.717] [2019-02-18] [SERIE] SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht RDCKWP
[13:55:35.842] [2019-02-18] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6
[13:55:35.842] [2019-02-18] [SERIE] SG antwortet nicht CODIERINDEX_LESEN
[13:55:38.546] [2019-02-18] [SERIE] 2020 Error LFCDHDIA.CPP (A_E65R.IPS/IPO) CDHapiResultText 1
[13:55:38.546] [2019-02-18] [SERIE] SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht RDCKWP
[13:55:38.664] [2019-02-18] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6
[13:55:38.664] [2019-02-18] [SERIE] SG antwortet nicht CODIERDATEN_LESEN